Відео

😮Solink just 💩 on the warheads and t238s😂

Just got their 39k brushless. And it really tranformed my aeg, with 13:1 gears the trigger response is immediate with no precocking. And the rps is about 35. Insane.

Nice to see someone who actually tells me what metal and alloys the pistol uses and doesn't bullshit me with OMG LOOK IT HAS PURPLE HOP RUBBER and other nonsense

Better hide that from the atf

What do you mean by rpm sweet spot? Is there something significant that happens at that rpm? Or is it like just enough to turn the spring?

Release date?

You painted the black and white one right?

Completly useless feature the lip tension control XD, just use the correct nozzle for your setup... Its ridiculous all the shit manufacturers try to sell us, and people keep falling on their trap. Maxx hop units are garbage, absolutly garbage for the prize tag, this one looks better, but still fuking overprized piece of junk there is no way you can justify this amount of money, just buy a Retro Arms unit, less than half the prize, double the quality and triple the performance.

Say interns you use on....

Curious on your thoughts about the Maxx hop unit that allows GBB buckings for AEGs. Like you I am a fan of the X-Range due to the stabilizer ring. I think the Maxx with an X-Range bucking could also work to slow and stabilize BBS with more aggressive loading builds.

Wow, thank you for sharing your knowledge. I knew the trick with the flathop in combination with enlarged barrel window and small nub, but I've tried it with hpa, and the results were meh. Wouldn't it be better if I placed the nub as far as possible and not in the middle of the barrel window? I can 3d print trolleys for e.x. maxx hopup unit, so its doable.

Hey what model seiko watch is that?

I've been using MAXX for a while and put super glue on the bucking lips to squeeze them in/stiffen them. With HPA this seems a lot more important due to nozzle speed , which is probably why the SI units are so popular among MTW owners

So I’m interested in the solink motors with the single direction bearing. But if there’s no arl then what happens when the motor is pulled out? Wouldn’t the gears spin backwards possibly damaging the rear of the piston? Also, if the entire gear train is being held by just the bearing in the motor tower, how much stress can it really take? I can’t see a bearing alone supporting the force of a high power spring like a m160. And if that bearing fails wouldn’t you need to replace the whole motor? Thanks for the advice!

What is the size of the stock SSP5 frame? From pictures it looks like a 4.3? I'm thinking of scratch building an SSP5 but want to still attach the front end to the frame. Either with the stock clamp block or drilling a hole in the aftermarket frame for the bolt. I think one of the best features of this gun is the fixed front end. I noticed some (if not all - minus the stock gun of course) of the builds in this video omit the front locking design.

Does the ssp5 require a hammer protection pad? Had mine for about a week. And i can clearly see marks on the frame from the hammer 🙂

Gotta say it is pretty baller of the designer of the gun to make videos like this... Who else does that? Like a sir!

Bastard I get my gearset tomorrow. You just beat me!

I've never worked on an EVO, but looking at you doing the bevel the pinion alignment, would it make sense to 3d print a motor cage for that bit? Then you just try to measure how much the motor adjustment screw needs to turn to get the motor in the depth position you shimmed it to while using the cage, when you insert the motor in the pistol grip. I dunno... just something that crossed my mind in the moment. Could probably be also useful for V2 gearboxes, perhaps. MP5 comes to mind. Looking forward to the next one!

This is not an BL Motor it just have only 2 wires

That's brilliant. Do you have any idea of what the starting delay for the motor is?

Thats a very interesting design for a motor! Have they said anything about a short version?

Really interesting motor. Thanks for the video. Didn't know this motor existed. Why does it have to be so hard to come across something like this?

Can you make the small pistol version? Just like pcp pistol model from iron pipe.. and what did you use to hold the pressure in the tube? Is it a disc or valve?

You're the man! Keep pushing the envelope!

Recently discovered you channel, Knuckles sent me. Very interesting stuff. I´m impressed, great videos!!!!!

What hop rubber shall I replace the shock one with? It's very soft and the plastic shroud doesn't seem to fit over something like an autobot.

Hi, I wonder would you trim the v3 tappet plate fins as well for timing?

I think i have pme tappet issues. Its consistent betwen two joules. 1.5 or 1.33 .1 difference but its randomly 1.3j or 1.5 j. I full full stroke 13/1, with a 30k motor but i use a 7.4 battery

is it the same with the lighter bbs when the ssp5 is the 4.3 version like this shoud be fixed for the 4.3 cuz you cant shoot 40s

@wyz2285 will this pistol be legal shooting under the uk legal limit of 350fps at 0.20g BB’s? Thanks

its nice that you've took time out of your own personal time to make it a non proprietary without messing up any of the other things however...... im sorry to say this with copyright laws and etc in place and from what im gonna guess you didn't ask them to do this to their own product, its Germany legal as they have been registered with the germany goverment as they have airsoft gun laws that state they have ot be registered with an F mark and details on what it is and by doing this and not re-registering them its completely illegal in their country and this is something i would have took into consideration before doing this. novritsch company CAN sue you for copyrighting and others as what your doing is taking their product to copy and altering it. in my eyes their nothing that needs changing on the ssp5 as what is their that needs to become no-propriety... slide? but why as it works so well and this company has achieve what other couldn't do with split slides. when doing modification to their products your better off asking first as their is a lot of lawsuits that they can put on you and that will definitely ruin your life, future jobs and your families.

Any estimated time frame for integrated tracer release? Haven’t heard a word about it…

Would this be a good base gun if I plan on upgrading mostly the external parts? I live in Canada and a TM Hicapa basically costs as much as the ICS Challenger. I am thinking of getting a ICS Challenger instead of TM Hicapa as it has more metal parts than a TM Hicapa.

There is a gap between the hammer and slide when the stock red dot plate is switched out. Is there a solution?

allover the place back and forth kyrtac novritsch, ! mentioned something about scorpio evo and laylax. The title you set for the videp is ssr90, thats what we came here for

Which sear springs do you recommended to applied with the light pull trigger setting.

imo if u have some tech skills, u can buy some cybergun p90 for less than 150, install a perun etu for p90, reshim gearbox and change compression kit, fit and reshim better gears, and u have a full upgraded p90, for same price as this both options with better trigger and no propietary parts

slide is metal? I think it's polymer but some guys say this is metal slide...

I own the ssp5. Iv broken sear bridge and one sear already wore its way threw the slide and is rubbing and catching on nozzle towards the back (105-115 psi max hpa I would be shooting 350 fps with .25). Need a new slide after one year of use. But when the gun did work it worked really good not going to lie. And your weighing and comparing the different slides with charging handles on the other brand slides????..........

I cant wait to get my hands on this I've been eyeing this down for a while.

how the hell does anyone get the outer barrel off? god himself installed mine and i can’t get it off after hitting it with a heat gun and using pliers and putting it in a vise

Where did you get those green parts?

where are these custom parts coming from??

Great video 😊 just pre ordered the ASG Scorpion Evo ultimate CNC upgrade. Can’t wait to get out there & zing sum bb’s !

Sr, can you please tell me why i can't change the lower grip of the SSP5 with the more aggressive pattern of the ssp2? I can't figure out why the ssp2 lower grip dont fit on the SSP5😢

What colored parts will fit the lower of it

Cow cow nozzle for hpa?

thank you for this very interesting video I have two small questions I think yes can we place a precision inner barrel and the 2nd question is this can we place another red dot than the novritsch what are the other brands that we can install

Love this video it opened my eye up to novritsch ssp1 now but one big question can aftermarket blowback uints fit into it? Thos may be a rhetorical question to some people and im asking cause my 2 army armament for some reason they have 💩 and they dotn wsnt to work now so for xmas im buying a new and cutting my loses